how to paint tiles – The Interiors Addict

By Naomi Findlay

Let’s face it, bathrooms should be spaces of zen and relaxation. No matter how big or small, every home deserves a beautiful, practical bathroom. Rather than spending big on major renovations (bathroom renovations and dollar signs go hand in hand), there are some simple changes you can do to update the look and feel of your bathroom – starting with the tub. Today, we share how to paint a bath tub.

Bath tubs are built to withstand endless hours of bath time, but that baby pink shade of enamel (or turquoise in Jen’s new reno!)? Not so much. Save yourself the hassle (and dollars) involved with ripping out your dated or worn-out bathtub by giving it a fresh lick of paint instead! A DIY paint job can not only give your bathtub a facelift, but also help protect the enamel so you can enjoy it for years to come.

Source: http://adrianned-onedayatatime.blogspot.com.au Click through for more

Stock up
Unlike DIY paint jobs involving tiles or cabinets, most bathtubs are of a similar size – meaning no calculations are needed to work out how much paint you will use. Just one pack of White Knight Tub ‘n’ Tile should adequately cover your whole tub (unless it is in really poor form, in which case you may need two packs).

Clean
Preparing your tub’s surface is a crucial step in a successful DIY makeover. Use an abrasive scrubber to blitz away any soap scum or bath oils that may be lurking on your tub – taking care not to overlook the drainage hole.

Source: thermoglazing.com Click through for more

Sand
Sanding is probably one of the more tedious steps in a bathtub makeover, and one that may be tempting to skip. However, a proper sand will ensure that your newly painted tub won’t start flaking and cracking after a couple of uses. Use some sandpaper (or an electric sander) to roughen up your tub’s surface – the aim here is to remove that glossy enamel finish. Chipped paint can lead to rust or damage to the rest of the finish, so be sure to carefully sand back any bumps or cracks.

To finish off, rinse the tub with warm water and let it dry before giving the tub a wipe down with some rust guard solvent for an ultraclean finish.

Protect
Use painter’s tape to protect the tiles surrounding the edges of your bathtub from paint, and lay down some drop sheets (or rags) on the floor. Wrap the taps and faucets in some plastic bags, securing with an elastic band (or hairband) – there is nothing worse than starting a paintjob and then dealing with a leaking tap. Also, don’t forget to tape your metal drain cover (unless you want to give it a makeover too).

AFTER
Source: My Creative Days. Click through for more

Paint
White Knight’s Tub ‘n’ Tile consists of two parts. Prepare two sealable containers (preferably glass) – one of these containers should be large enough to hold both parts A and B. Use this container to stir together both parts for at least five minutes (yes, five whole minutes!). Pour half of this mixture into your second container, seal both containers tightly and place one of them in the fridge, leaving the other out in room temperature. After an hour, stir up the room temperature paint for another five minutes, then get ready to paint!

Starting from the bottom of the bath tub, use a bristle brush to layer the paint in a criss-cross motion. Leave the first coat to dry for at least a day to a day and a half (depending on how warm or cold the temperature is).

Pull your second container of paint out of the fridge about an hour before applying your second coat. Give this container yet another five-minute stir, then apply in the same way as the first coat.

You will have to quarantine the bathtub for a full five days before using again, and keep the plastic bags covering the taps until the tub is ready for use.

That’s it! Treat yourself to a good, long bath in your shiny new tub.

How to paint tiles

–Naomi Findlay is Australia’s rapid renovation expert, an internationally renowned renovator, award-winning property stylist and speaker.She’s an industry leader in creating healthy wealthy spaces and creating wealth and profit from renovating property. Naomi is CEO of staging company Silk Home and founder and principal of education provider, the International Institute of Home Staging (IIHS).

How to paint tiles and save a fortune!

By Naomi Findlay

It’s no secret that kitchens and bathrooms are the highlights of the modern home. A tacky blue tile in the shower or 70s floral design can make your home look tired and dated. Before you take out a second loan and throw a sledgehammer at those eyesores, there is a quick and easy way to freshen up your bathroom – without leaving you shower-less for a month or hurting the hip pocket.

The budget-friendly fix? Tile paint. If your bathroom tiles are free from chips, cracks and other major damage, a simple refinish with White Knight tile paint can quickly turn your bathroom from drab to “va-va-voom” (as Neale Whitaker would say). Not only will you give your tiles a new lease on life, you will also help the environment by keeping them from becoming landfill.

Click on the image to see more of this amazing bathroom transformation using tile paint by The Painted Hive (before photo below).

Clean, repair and prepare

Before you crack open that tin of paint, remember: preparation is the key to success. A DIY refinish can quickly turn into a DIY disaster if you decide to skimp on the pre-painting steps. Think of this as an essential ingredient to the perfect cake – miss it, and the whole cake won’t turn out.

As clean as your tiles may look, a thorough spray and scrub using White Knight’s tile and laminate cleaner will ensure your tiles are squeaky clean and ready for their grand makeover (think residual soap scum or bath oils). Zap away any pesky mould with bleach, and fill in any grout or tile cracks with fresh grout or poly filler. If a tile is badly damaged, replace it with a tile of the same size – you don’t have to worry about matching the colour as it will be painted over anyway!

Use tape (you can go fancy with painter’s tape or use any masking tape you may have lying around) to protect non-tiled walls and taps, and lay down drop sheets (old blankets and rugs will work) in the bath tub and floor. The goal is to protect these parts from an accidental paint makeover.

Measure up

Before you can begin sprucing up your bathroom tiles, you need to calculate the amount of paint required for your DIY. Since everybody’s bathroom (and the amount of tiles in it) is different, buying a tin and hoping for the best is probably not the right way to go. Luckily, there is an easy way to determine how much paint you will actually need to use. Just multiply the length and height of the tiled walls, divide everything by 12 and voila! The final number is the amount (in litres) of paint that you will need.

Prime

Once your tiles are clean and any cracks and gaps have been filled in, it is time to prime. White Knight’s tile and laminate primer provides a base coat that helps your final coat of paint stick to the tiles and prevents peeling and scratching (ensuring your DIY efforts aren’t wasted when the kids knock the tiles during bath time). It also contains an anti-mould ingredient to further protect your refreshed tiles.

Use a roller to zig-zag the primer across your tiles, finishing off corners and edges with a paint brush. Avoid painting straight from the tin, otherwise you will ruin the primer for future use – use a rolling tray instead. The key here is to focus on small sections at a time to ensure good coverage. Just two coats of primer four hours apart, a light sand after each (wait for the coat to dry first!), and you are ready to paint.

BEFORE (Pic source: Littlepinknotebook.com)

Paint

The beauty of White Knight’s tile paint is that you can tint it to whatever colour you want, as well as enjoy either a traditional glossy finish, or opt for a satin effect (with their laminate paint option). Apply your paint in the same manner as your primer: use a roller and tray, and paint brush for corners and edges. Zig-zag your first coat, leave to dry for six hours, then finish off with a light sand before applying the second coat using long strokes. Stir your paint every now and then – it will prevent streaks and help you achieve a smooth finish. And remember: two thin coats are better than one thick one!

Your beautiful new tiles will be fully cured in a week, so take extra care to avoid bumps or harsh cleaners. If you would like to create a little contrast between your tiles and grout, simply apply White Knight’s grout pen to the grout.

Clean up

With so much focus on preparing your tiles and bathroom, it can be easy to forget about the actual equipment you use. Paint brushes, rollers, sponges and trays should be washed as soon as you are finished with them – unless you don’t mind throwing them out after one use! However, after your bathroom revamp, you might just get itching to make over your kitchen tiles next!